OBSBOT Tail 2 PTZR Camera Drops to $999 for Amazon Prime Day

Sponsored Article

The AI-powered PTZ with NDI, SDI, and onboard tracking is on sale June 23–29 via the OBSBOT Official Store and Amazon — marking one of the deepest discounts to date.

OBSBOT is discounting its Tail 2 AI-powered PTZR camera through its Official Store and Amazon US during Prime Day.

• Tail 2 (NDI-activated) from $1298 to $1088.
• Tail 2 from $1199 to $999.
• Over 16% OFF. Both discounts are available from Jun. 23rd-29th.

For production teams running lean at live events, houses of worship, corporate conferences, or podcast studios, the Tail 2 packs a feature set that typically commands a significantly higher price tag: 3G-SDI, HDMI 2.0, NDI HX3, onboard AI tracking, and a 1/1.5″ sensor — all in a body weighing 2.35 lb. This Prime Day window is one of the few times the camera has dropped below its standard street price.

World’s First PTZR Design

The Tail 2’s headline mechanical feature is its PTZR form factor — Pan, Tilt, Zoom, and Roll. An engineered gimbal structure rotates the lens assembly 90°, enabling lossless vertical 4K capture without software cropping or resolution loss. For productions that need both a widescreen broadcast feed and a portrait-format social media cut from the same camera, this removes the need for a dedicated vertical rig. An integrated Auto Leveling System maintains horizon stability automatically, rated at ±0.003° angular vibration — precise enough for virtual production FreeD workflows.

Imaging System

A 1/1.5″ CMOS sensor captures 50 megapixels (8192 × 6144). The 12-element optical system covers a 22–110mm equivalent focal range — 89° to 21° diagonal FOV — with a maximum aperture of f/1.8 at wide and f/3.0 at telephoto. The camera delivers 5x optical zoom, extending to 12x hybrid zoom. Video output tops out at 4K60 over HDMI, SDI, NDI/IP, and USB-C simultaneously. At 1080p, it reaches 120fps. HDR is available at 4K30 and 1080p30.

All-pixel PDAF handles autofocus across most lighting conditions. Dual native ISO runs 100–6400. A 2μm pixel size and AI noise reduction extend low-light capability to challenging environments, such as dimly lit sanctuaries or studio sets with uneven lighting.

AI Tracking 2.0

OBSBOT’s updated tracking engine introduces “Only Me” mode, which locks to a single selected subject and ignores other potential targets in frame — a practical solution for following a specific speaker on a crowded stage without the camera jumping to crew members or audience. Group Tracking handles the opposite scenario, identifying and framing multiple subjects simultaneously.

Beyond humans, the Tail 2 recognizes 30+ animal types and 200+ objects via a double-click interface in the Obsbot Start app. Gesture control operates at extended range, enabling solo operators to trigger tracking, adjust zoom, and start or stop recording without touching the camera. Auto Zoom scales dynamically between 5x Optical Zoom and 12x Hybrid Zoom to maintain appropriate subject framing.

I/O and Connectivity

The Tail 2’s port layout covers most professional integration scenarios: HDMI 2.0 output, 3G-SDI/BNC (1080p60 maximum over SDI), USB-C 3.0, RJ45 Ethernet with PoE+ (802.3at, 30W), RS-232 in/out (2.5mm sub-mini), 3.5mm TRS mic input, 3.5mm TRS line input, and a microSD slot supporting cards up to 1TB. Wi-Fi 6 (802.11ax) with bipolar antenna delivers up to 1,200Mbps wireless throughput and a 140m range. Bluetooth 5.4 supports the optional Smart Remote Controller.

Protocol support covers NDI HX3, VISCA over IP, Pelco D/P, ONVIF, and FreeD. RS-232 daisy chain supports up to 255 devices in a single topology. Pan range is 340° (±160°); tilt covers 92° (−60° to +32°).

Who It’s For: Use Cases

Live Event and Broadcast Production. Broadcast engineers running multi-camera event setups can integrate the Tail 2 directly into existing NDI or SDI workflows without additional encoding hardware. The 3G-SDI output feeds straight into production switchers, while NDI HX3 covers IP-based infrastructures. With RS-232 daisy-chain and VISCA/Pelco protocol support, it drops into existing PTZ control systems alongside cameras from other manufacturers. For ENG operators pulling double duty as cameraman and producer, the AI tracking removes the need for a dedicated camera operator on secondary angles.

House of Worship. Fixed-install teams benefit from PoE+ delivery — a single Ethernet cable handles both power and network, simplifying ceiling and balcony mounts. The Auto Leveling System compensates for imperfect mounting surfaces. “Only Me” mode keeps focus locked on a pastor or soloist even as other people move through frame, and the 5x optical zoom (12x hybrid) covers sanctuary depth without visible quality drop at 1080p over SDI.

Podcast and Studio Multi-Cam. Content creators scaling from single-camera to multi-camera setups can run up to three Tail 2 units through OBSBOT Live for real-time multicam streaming, with no dedicated production switcher required. The gesture control is particularly useful in solo recording environments — operators can trigger zoom changes and tracking from across the studio without stopping the take. The 5,000mAh battery (up to 5 hours) means up to 5 hours of continuous recording or live streaming, giving you reliable power that lasts through your most important sessions.

Esports and Streaming Production. The vertical shooting capability addresses an increasingly common requirement: simultaneous horizontal broadcast output and portrait clips for TikTok and Instagram Reels from a single camera. The 4K60 output and 120fps at 1080p provide enough frame rate headroom for slow-motion highlight packages. Group Tracking handles tracking and accuracy, maintaining stability even during fast movement.

Software Ecosystem

OBSBOT bundles four control applications: Obsbot Start for mobile-based preview and control, Obsbot Live for multicam streaming with up to three Tail 2 units, OBSBOT Center for unified multi-device control on Mac or Windows, and a WebUI console accessible from any browser on the same network. The optional OBSBOT Talent hardware functions as a multicam production hub with NDI, HDMI, and USB connectivity.

Available via the OBSBOT Official Store and Amazon US.

Prime Day Pricing

• Tail 2 (NDI-activated) – $1088.
• Tail 2 – $999.

Over 16% OFF.

Both discounts are available from Jun. 23-29

Key Features

• World’s first PTZR camera design — 90° lens rotation for lossless vertical 4K shooting
• AI Tracking 2.0 with “Only Me” lock, Group Tracking, gesture control, and Auto Zoom.
• 5x Optical Zoom
• 12x Hybrid Zoom
• 4K60fps and 1080p120fps output via HDMI, SDI, NDI/IP, and USB-C simultaneously
• 1/1.5″ CMOS sensor, 50MP, 12-element optical system, all-pixel PDAF
• 5x optical zoom / 12x hybrid zoom, 22–110mm equiv. (f/1.8–f/3.0)
• NDI HX3, FreeD, VISCA over IP, Pelco D/P, and ONVIF protocol support
• 3G-SDI, HDMI 2.0, USB-C 3.0, PoE+ Ethernet, RS-232 ×2, Mic In, Line In, microSD (up to 1TB)
• Wi-Fi 6 (802.11ax) — 1,200Mbps throughput, 140m wireless range
• 5,000mAh battery — up to 5 hours continuous operation
• Dual native ISO 100–6400, NightView AI noise reduction, HDR at 4K30/1080p30
• 3-axis stabilization, ±0.003° angular vibration, integrated Auto Leveling System
• Tally light, 1/4″-20 mount, RS-232 daisy chain up to 255 devices

Full Technical Specifications