NANLUX Motorized Yoke-L for Evoke 2400B/5000B
NANLUX has announced its new Motorized Yoke-L for Evoke 2400B/5000B. It allows for easy and efficient pan and tilt control for the NANLUX Evoke 5000B and Evoke 2400B LED spotlights.
Key features
- Compatible with Evoke 5000B/2400B
- Dual-axis adjustment
- Extensive range: pan 540° and tilt 270°
- Magnesium alloy design with high payload capacity
- IP66-rated protection
- Self-locking mechanism prevents accidental sag
- Supports manual adjustment
- Two mounting solutions: junior pin light stands, and trusses ≤60 mm in diameter
- Wired and wireless control methods: On-board, Wired Controller, DMX/RDM, Art-Net/sACN, NANLINK App, LumenRadio CRMX
The K-E-EVL Motorized Yoke-L was designed to reduce the physical workload when repositioning the light and to enhance on-set workflow and safety. It also features an IP66-rating so it can be used in inclement weather conditions.
The motorized yoke offers a wide range on both pan and tilt axes. The pan covers 540° and completes a full motion in 47 seconds, while the tilt spans 270° and takes 26 seconds to cover its full range.
The motorized yoke offers multiple control options, both wired and wireless. The buttons and knobs on the control panel enable precise angle adjustments, and the CENTER button instantly resets the yoke to its 0° pan and tilt position.
The EXT, DMX, and LAN ports on its control box allow control via the wired controller, DMX/RDM, and Art-Net/sACN. Built-in Bluetooth and CRMX modules also enable seamless wireless control via the NANLINK App and CRMX-compatible devices.
It is constructed from magnesium alloy, and NANLUX states that the motorized yoke offers a good balance of strength, weight, and payload capacity. It can securely support heavy setups like the Evoke 5000B attached with the FL-45E Fresnel lens.
A high-strength motor delivers up to 40 N·m of torque on the tilt axis, while an internal self-locking mechanism secures the yoke in position after adjustments are made or when powered off. Manual adjustment is also supported when required. The quick-release plate can be returned to its initial position using the included T-handle, minimizing effort when detaching fixtures from the yoke.
Installing the motorized yoke is straightforward. With the Evoke 5000B, simply insert the yoke’s quick-release plates into the fixture’s matching quick-release plate bases, connect the extension cable to the fixture’s EXT port, and it’s ready to go.
For the Evoke 2400B, users can attach the included quick-release adapters and connect the extension cable to the fixture’s DMX IN port using the DMX adapter cable. The motorized yoke can be directly installed onto light stands with a junior pinreceiver, or mounted on trusses up to 60 mm in diameter using the included truss adapter.
An included flight case is constructed of aluminum alloy and designed with rolling wheels.
Pricing & Availability
The standard kit costs $2,290 USD, and the flight case kit costs $2,490 USD. Both are shipping now. The YK-E-EVL Motorized Yoke-L will be showcased at the 2026 BSC Expo in London.
